CLGYTC8S |
Figure 8 Cable |
Description:
The fibers, 250 m,are positioned in a loose tube made of a high modulus plastic, the tubes are filled with a water-resistant filling compound. The two sides PSP are longitudinally applied over the outer loose tube. Steel wires and loose tubes filled with water proof compound to ensure compact and longitudinally water blocking ,this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.
Characteristics:
High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
PSP enhancing moisture-proof
Small diameter, light weight and friendly installation
Long delivery length and low price.
Standards:
GYXTC8S cable complies with Standard YD/T 1155-2001 as well as IEC 60794-1.
Optical Characteristics:
G.652 |
G.655 |
50/125 m |
62.5/125 m |
||
Attenuation(+20 ) |
@850nm |
3.0 dB/km |
3.0 dB/km |
||
@1300nm |
1.0 dB/km |
1.0 dB/km |
|||
@1310nm |
0.36 dB/km |
0.40 dB/km |
|||
@1550nm |
0.22 dB/km |
0.23dB/km |
|||
Bandwidth (Class A) |
@850nm |
500 MHz km |
200 MHz km |
||
@1300nm |
1000 MHz km |
600 MHz km |
|||
Numerical Aperture |
0.200 0.015NA |
0.275 0.015NA |
|||
Cable Cut-off Wavelength cc |
1260nm |
1480nm |
Technical Parameters:
Cable Type |
Fiber Count |
Cable Diameter mm |
Cable Weight kg/km |
Supporting Wire Spec |
Connection Diameter |
Tensile Strength Long/Short Term N |
Crush Resistance |
Bending RadiusStatic/Dynam cmm |
GYXTC8S |
2~12 |
7.6 5×14.5 |
118 |
1.0mm*7 Stranded wires |
HeightWidth 3.0×2.5 mm |
1000/2500 |
300/1000 |
80/160 |
GYXTC8S |
14~24 |
8.2 ×15.1 |
129 |
1.0mm*7 Stranded wires |
HeightWidth 3.0×2.5 mm |
600/1500 |
300/1000 |
90/180 |
Storage/Operating Temperature : -40 to + 60
Fiber Optic Cable workshop &Cables ready to delivery show